PIR Motion Sensor For Lights

Stand Alone Type

220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.)

General Information
Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights.

An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode,

Features

• Wall / Ceiling Mount Suitable
• Weatherproof - IP44
• Time & LUX Adjustment
• Patented Modern Design
• Automatic Operation
• Manual Override
• Saving of Electricity

Applications

• Car Park
• Drive ways
• Stair ways
• Entrances
• Corridors

NL90

IS9E

Specifications	NL90	IS9E
Power Requirement	AC 220 ~ 240V / 50Hz	AC 220 ~ 240V / 50Hz
Lighting Load	Max 1,000W Incandescent or Max 40W x 10 Fluorescent	Max 1,000W Incandescent or Max 300 W Fluorescent
Detection Angle	Up to 110° at 20° C	Up to 120° at 20° C
Detection Distance	Up to 12M at 20° C	Min. 14M at 20° C
Swiveling Angle	Horizontal 190° Vertical 160°	Horizontal 70° Vertical 35°
Mounting Height	Recommended 1.8 2.5M (5.9 ~ 8.2 Ft) Wall Mount or 2.5 ~ 4.0M (8.2 ~ 13.1Ft) Ceiling Mount	Recommended 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) Wall Mount or 1.8 to 2.5 meters Ceiling Mount
Wall Switch Control	On / Off / Manual Override	On / Off
Sensor Operation	Auto	Auto
Time Adjustment	5 3 sec ~ 12 3min	From ( 10 ± 5) sec. to ( 4 ± 1) minutes
Lux Adjustment	Approx. 0 ~ 1,000Lux.	Approx. 0 ~ 1,000Lux
Operating Temperature	-20° C ~ +40° C	-20° C ~ +40° C
Warm Up Time	About 1 min	About 1 min
Protection Class	Class II	II
Protection Degree	IP44	IP44